Cleaning Instructions
Troubleshooting
Cleaning the pump assembly (cont.)
Pull out the inner part of the pump assembly (D) and cap.
Clean all pump parts and seals with water (or a suitable cleaning agent).
Reassemble the hose (G) and pump assembly (D) in the reverse order.
5
6
7
*When assembling the pump ensure that the pump gaskets are seated
properly after installation and are not squashed.
4
Unscrew the bottom section of the pump assembly. Inspect and clean the
pump O-ring. Install a new O-ring if necessary.
FAULT
POSSIBLE CAUSES
REMEDY
Pump does not
provide pressure
Pump sprays
with poor jet spray
Bottle is difficult to open
Hose connections at the
pump and sprayer handle are leaking
Tighten the hose connections
at the pump and sprayer handle
Filter in trigger blocked
Clean the filter in the trigger handle
Pressure in the bottle is too low
Clean the bottle cap
Valve in the bottle cap blocked
Clean the bottle cap
Nozzle blocked
Clean the nozzle
