Assembly Instructions
Safety Instructions
Always wear protective clothing including safety glasses and gloves when using this
sprayer.
This sprayer is designed for domestic use only and is to be used with liquids that are
suitable for use with Viton® seals. Follow the liquid manufacturers safety instructions
prior to use.
Liquids used with sprayers can be dangerous; if swallowing or skin contact occurs,
always refer to the safety instructions of the liquid used or contact the poisons
information centre or a doctor immediately.
Avoid spraying in windy conditions.
Store out of direct sunlight and away from children.
Always release pressure before filling, cleaning or storing.
Pump Lever Assembly:
Pull the pump lever (B) that is already attached to the
bottle down so that it is on a right angle to the spray
bottle (C).
Attach the pump lever brace (A) by attaching the end with the short bend to
the bottom of the pump lever and the end with the long bend to the top of
the pump assembly.
Secure the pump lever into position by attaching a washer to the bottom
part of the pump lever and then inserting the metal drop pin (J). Insert the
second metal drop pin in between the two plastic pieces at the top of the
pump lever
1
2
3
