Installation & Operation Continued:
9. Insert product container into shroud until it locks into
place.
8. Connect water supply
hose of at least 1/2" ID
to water inlet swivel. Min.
25 PSI pressure is re-
quired for proper op-
eration. Connect oppo-
site end of hose to water
supply.
Turn water supply on.
10a. Push button to start flow of desired c oncentrate
solution; release button to stop flow of solution.
To lock the High Flow button in the "on" position:
press button until it "locks" into place.
10b.
To unlock, press button release lever on left side
of cabinet .
11. To remove chemical concentrate container, place
hand securely under the empty product, slide release
lever to the right and pull concentrate container out.
Description
Part No.
Key
1
238100
Strainer washer
2
10082801 Swivel stem (molded)
3
10082830 Swivel collar (molded))
4
10075925 Pipe plug
5
10075980 Valve parts kit
a. diaphragm
b. armature
c. spring
d. valve bonnet
6
10079010 Spring
7
10079000 Magnet
8a
10084231 1.0 GPM flow control kit
b
10084232 3.5 GPM flow control kit
9a
10089941 Eductor lock left
b
10089937 Eductor lock right
10
10089938 Vent seal
11
10089983 Magnet pusher kit (*includes 9 & 10)
12a
290SMP
1.0 GPM eductor assembly
b
291SMP
3.5GPM eductor assembly
13
10089927 Hose barb*
*Included in eductor assembly
14 a
10089981 Tubing replacement kit (1.0 GPM)
b
10089982 Tubing replacement kit (3.5 GPM)
15 a
90081017 1.0 GPM discharge tube
with flooding ring (10")
b
90080288 3.5 GPM discharge tube
with flooding ring (6')
16
10080730 Hose hook, dark grey
17
10089923 Cabinet front
18 a
90082464 Button, Bottle
b
90082463 Button, Bucket
19
10089916 Bottle release ring
20
90082469 Locking button release
21
10089931 Mounting bracket
22
10089976 Locking bar
Not Shown:
10091920 Water inlet hose, 3/8" x 6'
s
10a.
10b.
