3
3.0 OPERATION & MAINTENANCE
Before Installation
:
Inspect the power conditioner for any physical damage. If any damage is
visible do not use the power conditioner and contact the seller immediately.
Environmental Conditions
:
The
NXT POWER
Conditioner is designed only for installation
in an indoor, temperature and humidity-controlled environment. Install the power conditioner
away from heat, moisture, and dust sources.
Ensure the unit has a minimum of 3 inches (75mm) of clearance on all sides of the unit. Do not
block any of the air vents or place objects next to or on top of the unit.
Place the
NXT POWER
Conditioner as close to the load equipment/electronic devices as
possible. Plug in all electrical devices that you would like to protect from electrical noise into the
power conditioner. Ensure the power conditioner is not overloaded. This can be done by
making sure the power conditioner is not loaded above its maximum rating (please see back
panel of the unit for rating information). If you have any questions regarding the rating of the
unit, please contact the seller.
Power Conditioner Voltage and Power Rating:
It is important to choose the correct
power conditioner for your application. In this manual you will find the voltage and power rating
information for the model power conditioner you have. Ensure the power conditioner is correctly
rated for your application. If you have any questions in this regard, contact the seller.
Installation of plug and receptacle model:
Locate the power conditioner as close to the
load equipment (the equipment you want to power from the power conditioner) as possible. Only
plug the power conditioner into a correctly rated outlet. Contact the seller or qualified electrician
if you are unsure how to install the power conditioner.
WARNING
CAUTION
WARNING
TIP
2-person lift
