4
PROPER PLACEMENT AND CLEARANCE OF GRILL
•Never use your gas grill in a garage, porch, shed, breezeway or any other enclosed area. Your gas grill is to be used outdoors
only.
•DO NOT install this unit into combustible enclosures.
•Minimum clearance from sides and back of unit to combustible construction, 61 cm (24 inches) from both sides and
61 cm (24 inches) from the back.
•DO NOT use this appliance under overhead combustible surfaces. This outdoor cooking gas appliance is not intended to be
installed in or on recreational vehicles and/or boats.
•DO NOT obstruct the flow of ventilation air around the gas grill housing. Only use the regulator and the hose assembly
supplied with your gas grill. Replacement regulators and hose assemblies must be those specified in this manual.
•The regulator and hose assembly must be inspected before each use of the grill. If there is excessive abrasion or wear or if
the hose is cut, it must be replaced prior to the grill being put into operation. The replacement hose assembly shall be that
specified by the manufacturer.
•This outdoor cooking gas appliance is equipped with a pressure regulator which complies with the standard for pressure
regulating valves for LP Gas ANSI/ UL 144.
•DO NOT use briquettes of any kind in the grill.
•Never use the grill in extremely windy conditions. If located in a consistently windy area (oceanfront, mountaintop, etc.) a
windbreak will be required. Always adhere to the specified clearance.
•Never use a dented or rusty propane tank.
•Keep any electrical cords and the fuel supply hose away from any heated surface.
•While lighting, keep your face and hands as far away from the grill as possible.
•Burner adjustment should only be performed after the burner has cooled.