9.
Install Main Lid Handle and Ignitor Battery
•
Twist and remove Ignitor Cap from Control Panel
•
Place 1 AA battery into the igniter body with + outward and – inward. (Battery not included)
•
Install the igniter cap and spring over the + end of the battery and tightly screw it onto the control panel.
•
Repeat the same steps for the igniter on the other side.
•
Install the both left and right side handle to the cart with screw EE.
EE: 4pcs
Electrode Check
NOTE
: We recommend at least 2 people to perform the Electrode Check before proceeding
This test will ensure that the Spark Electrode Tips are properly positioned so your grill can easily ignite.
10