6
Quick Start Guide
General Jumper Configuration
Jumper
Function
J15
Enable/Disable CAN terminator resistor
J10
Enable/Disable potentiometer
J12
Enable/Disable OSJTAG interface bootloader mode
J19
Enable/Disable RS485 half duplex control lines
Power Supply
Jumper
Position
Function
J5
1-2
3.3 voltage is coming directly from the 3.3 voltage regulator on the primary elevator
2-3
3.3 voltage provided by on-board circuitry
TWR-PXS2010 Jumper Options
The following is a list of all jumper options. The default installed jumper settings are
shown in white text within the blue boxes.
5
