manualshive.com logo in svg

NXP Semiconductors SE050, Application Note, Page: 30 / 36

Share
Download
NXP Semiconductors SE050 Application Note Download Page 30

NXP Semiconductors

AN12398

Quick start guide to SE050 Visual Studio projects

AN12398

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2019. All rights reserved.

Application note

Rev. 1.1 — 20 June 2019

534611

30 / 36

Figure 46.  Open 

PlugAndTrustMW.sln

 Visual Studio project solution

3. The Visual Studio Community 2017 IDE will open with the SE050 Plug & Trust

middleware project examples included in the workspace as can be seen in 

Figure 47

:

Figure 47.  

PlugAndTrustMW.sln

 Visual Studio project workspace

4. Change the VCOM port number in the SE050 Plug & Trust middleware project. To do

so, follow the instructions shown in 

Figure 48

:

a. Go to the 

ex_common

 project and open the 

ex_sss_ports.h

 file inside the

headers

 directory.

b. Change 

#define EX_SSS_BOOT_SSS_COMPORT_DEFAULT "\\\\.\\COMx"

with the port COM number your laptop assigned to your FRDM-K64F. In this setup,

the COM number is COM9.

Summary of Contents for SE050





































Reviews:

No comments