manualshive.com logo in svg

NXP Semiconductors SE050, Application Note, Page: 27 / 36

Share
Download
NXP Semiconductors SE050 Application Note Download Page 27

NXP Semiconductors

AN12398

Quick start guide to SE050 Visual Studio projects

AN12398

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2019. All rights reserved.

Application note

Rev. 1.1 — 20 June 2019

534611

27 / 36

Figure 41.  Unzip se050 middleware

Note: 

It is recommended to keep 

simw-top

 with the 

shortest

 path possible and

without spaces

 in it. This avoids some issues that could appear when building the

middleware if the path contains spaces.

4.2 Build SE050 Plug & Trust middleware project examples

The SE050 Plug & Trust middleware uses CMake for building the project examples into

your local machine. To build SE050 Plug & Trust middleware, open a Command Prompt

and use the following steps as shown in 

Figure 42

:

1. Go to folder with the unzipped SE050 middleware:

(1) Send >> 

cd C:\se050_middleware\simw-top\scripts

2. Define the environment:

(2) Send >> 

env_setup.bat

3. Generate the SE050 Plug & Trust middleware project examples:

(3) Send >> 

create_cmake_projects.py

Note

: This command may take a few seconds to complete.

Summary of Contents for SE050





































Reviews:

No comments