NXP Semiconductors SC18IS606-EVB, User Manual, Page: 5 / 10

NXP Semiconductors
UM11666
SC18IS606-EVB evaluation board
4.1 Headers and jumpers
Please refer to Figure 1 to find the location of connectors and jumpers on the
SC18IS606-EVB evaluation board.
Figure 1. Headers and jumpers
4.2 Jumper settings
Header Jumper on Comment
JP3 1-2, 3-4, 5-6 I
2
C target address 0x50
JP4 1-2, 3-4 Pull out jumpers if pull ups on I
2
C controller
JP5 1-2 Pull out and insert current meter if SC18IS606 current is to be measured
Table 1. Jumper settings
JP1 – SPI header Function
1 Ground
2 SPICLK
3 MOSI
4 MISO
5 -CS2
6 -CS1
7 -CS0
Table 2. JP1 - SPI header
UM11666 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
User manual Rev. 1.0 — 28 September 2021
5 / 10