NXP Semiconductors S32R274, User Manual

Page: 35 / 40

Default jumper summary table
S32R274/372 EVB User Guide, Rev. 0, 08/2018
NXP Semiconductors 35
Connector Motherboard
257 BGA (SCH
NAME)
0-
Ohm
Link
Connector Motherboard
257 BGA (SCH
NAME)
0-
Ohm
Link
A-237 PW12
NC#
B-4 PX12
NC#
A-238 PW13
NC#
B-3 PX13
NC#
A-239 PW14
NC#
B-2 PX14
NC#
A-240 PW15
NC#
B-1 PX15
NC#
Some of the port pins of the MCU have dedicated functionality or require short trace lengths to improve
signal intgrity . Therefore these signal have been routed to jumper or connectors on the daughter card.
1. JTAG - (J24)
2. Nexus Aurora – (J23)
3. SIPI – (J17)
4. Sigma Delta ADC – (J16)
5. DAC – (J18)
6. CTE – (J13)
7. MIPI-CSI2 – (J15)
8. RGMII – (U8) (Gb Ethernet Physical Layer)
6. Default jumper summary table
The details for the DEFAULT jumper configuration of the EVB as set up on delivery can be found in
Table 12 and Table 13 depending on the required regulation mode.
6.1. Default jumper table - motherboard
On delivery the motherboard comes with a default jumper configuration. Table 15 lists and describes
briefly the jumpers on the MPC57xx motherboard and indicates which jumpers are on/off on delivery of
the board.
Table 15. Default jumper table - motherboard
Jumper Default Pos PCB Legend Description
J8 Off MASTER
LIN Master/Slave select
J9
Off CAP A DIS
Disable capacitor circuitry for
FlexRAY_A signals
J10
Off CAP A DIS Disable capacitor circuitry for