NXP Semiconductors
QN908x
DK User Guide
QN908x-DK
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2017. All rights reserved.
User guide
Rev. 1.0
— June 2017
7 of 28
Fig 3.
J-Link connector
2.4 QN9080 module
The QN908x IC integrates the BLE radio, controller, protocol stack, and profile software
on a single chip, which provides a flexible and easy way to use the BLE SoC solution. It
also includes a high-performance MCU (32-bit ARM
®
Cortex
®
-M4F), on-chip memory,
and peripherals for users to develop a truly single-chip wireless MCU solution.
The QN9080 module is shown in
Fig 4
.
Fig 4.
QN9080 module board
The QN908x module has a MIFA antenna on the front side of the board. Therefore, it can
work without an external antenna. There is a RF connector that has a switch on the RF
front-end. You can easily perform the RF test by connecting an RF cable to the RF
connector.
