NXP Semiconductors QN908x User Manual Download Page 2

Page: 2 / 28

NXP Semiconductors

QN908x

DK User Guide

QN908x-DK

All information provided in this document is subject to legal disclaimers.

User guide

Rev. 1.0

— June 2017

2 of 28

Contact information

For more information, please visit:

http://www.nxp.com

Revision history

Rev

Date

Description

0.1

20160818

Initial release.

0.2

20160908

Updated the figures, schematics, and PCB layout according to the QN908x DK board V1.0
and added the QN9080 QFN module board information.

0.3

20161110

Updated pictures and schematics according to the QN908x DK board V1.1, added the
current test using the DC power analyzer. Added notes about using a battery as the power
supply for the QN9080 module.

0.4

20170117

Updated pictures and schematics according to the QN908x DK board V1.2 and changed
the jumper default settings.

1.0

20170613

Public release.

Summary of Contents for QN908x





























Search results

Summary of Contents for QN908x

Reviews:

Related manuals for QN908x

Brands by name

Popular brands

NXP Semiconductors QN908x, User Manual

Search results

Summary of Contents for QN908x

Reviews:

Related manuals for QN908x

Brands by name

Popular brands