NXP Semiconductors
UM10883
PN7462 family Quick Start Guide - Development Kit
UM10883
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.6 — 14 May 2018
319816
3 of 120
1. Getting started
This document gives information about how to start software and hardware development
with PN7462 NFC Controller Development Kits: OM27462CDK [1] and OM27462CDKP
[2]. Development kit ensures easy and quick development of NFC applications running
on the PN7462 family [3] derivates. This guide gives extensive kit hardware overview and
describes board configuration options.
Document further describes PN7462AU FW and SW examples package. It gives step by
step instruction to install MCUXpresso IDE [4] and to run example application. It is also
provided extensive introduction to the PN7462 family software stack [5] and describes
each example in detail.
Finally, document describes NFC Cockpit [6], custom Windows application used in
prototyping and optimization.
In this document the terms „MIFARE DESFire card“, „MIFARE Classic card“ and
„MIFARE Ultralight card“ refer either to a MIFARE DESFire IC-based contactless card, a
MIFARE Classic IC-based contactless card or a MIFARE UItralight IC-based contactless
card.
1.1 Introduction to PN7462 NFC Controller Development Kits
Both, the OM27462CDK and the OM27462CDKP development kits are parts of the
PN7462 family product support package. Development Kits are designed to demonstrate
all functionalities of the PN7462 family and easies development of customized
applications and antenna design.
1.1.1 OM27462CDK
OM27462CDK Development Kit is based on the PNEV7462B board. Content of the
Development Kit is displayed on the following picture.
Fig 1.
OM27462CDK Development Kit
