NXP Semiconductors
UM10300
User Manual OM6290
UM10300_1
© NXP B.V. 2008. All rights reserved.
User manual
Rev. 1.0— 8 August 2008
21 of 30
•
Program security bits;
•
Check which Flash blocks are blank or in use with the ability to easily erase all blocks
in use;
•
Read the device signature;
•
Read any section of Flash and save as an Intel Hex File;
•
Reprogram the Boot Vector and Status Byte with the help of confirmation features
that prevent accidentally programming incorrect values;
•
Display the contents of Flash in ASCII and Hexadecimal formats;
•
Single-click access to the manual, Flash Magic home page and NXP Microcontrollers
home page;
•
Ability to use high-speed serial communications on devices that support it. Flash
Magic calculates the highest baudrate that both the device and the PC can use and
switches to that baudrate transparently;
•
Command Line interface allowing Flash Magic to be used in IDEs and Batch Files;
•
Manual in PDF format;
•
Supports half-duplex communications;
•
Verify Hex Files previously programmed;
•
Save and open settings;
•
Able to reset Rx2 and 66x devices (revision G or higher);
•
Able to control the DTR and RTS RS232 signals when connected to RST and /PSEN
to place the device into BootROM and Execute modes automatically. An example
circuit diagram is included in the Manual. Essential for ISP with target hardware that
is hard to access;
•
Able to send commands to place the device in BootROM mode, with support for
command line interfaces. The installation includes an example project for the Keil
and Raisonance 8051 compilers that show how to build support for this feature into
applications;
•
Able to play any Wave file when finished programming;
•
Built in automated version checker - helps ensure that always the latest version is
used;
•
Powerful, flexible Just In Time Code feature. Write your own JIT Modules to generate
last minute code for programming. Uses include:
−
Serial number generation
−
Copy protection and copy authorization
−
Storing program date and time - manufacture date
−
Storing program operator and location
−
Lookup table generation
−
Language tables or language selection
−
Centralized record keeping
•
Displays information about the selected Hex File, including the creation and
modification dates, flash memory used, percentage of the current device used
•
For more information visit www.flashmagictool.com