NXP Semiconductors
UM11762
NTS0304EUK-ARD evaluation board
Figure 15. Graphical interface at start-up (“SETTINGS” tab activated by default)
The GUI application starts with
SETTINGS
tab (marked with red arrow). The center of the
window displays the board settings. The section provides the following settings:
• EVK:
displays the list of EVKs. Selecting a wrong EVK board causes the connection to
fail and a pop-up window with the message:
“Unable to Connect with EVK”
appears on
the screen.
• Device:
displays the name of the device under test. This GUI supports only
NTS0304EUK-ARD
daughterboard.
• COM port:
displays port selected for the communication. The port is automatically
selected by the system (in the picture is COM 5).
Assuming the correct parameters are chosen, clicking the
Connect
button establishes
the connection with the EVK. In the bottom side of the GUI window a status bar shows in
real time the status regarding connection between PC and the EVK.
UM11762
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2022. All rights reserved.
User manual
Rev. 1.0 — 27 May 2022
23 / 29