NXP Semiconductors MPC560xB, User Manual

Page: 16 / 39

MPC560xB Controller Board User’s Guide, Rev. 0
Interface Description
Freescale 16
3.12 Header J307
Header J307 allows control signals monitoring of the MC33937A, see Table 18 .
Table 18. J307 Signal Description
3.13 Header J802
Header J802 is usable for external measurement and monitoring of UNI3 signals, important for the motor
control application, see
Table 19 .
Table 19. J802 Signal Description
10 ANA9 Standard channel (ADC0) Analog input
11 ANA10 Standard channel (ADC0) Analog input
12 NC Not connected Analog input
13 GNDA Ground –
14 +5VA +5V analogue supply voltage –
Interface Pin Signal Name MCU Signal Description Direction
1 MC33937_EN PA[14] MC33937 Device Enable Digital output
2 MC33937_/RST PF[10] MC33937 Device Reset Digital output
3 MC33937_OC PF[11] MC33937 Overcurrent indication Digital input
4 MC33937_INT PF[13] MC33937 Interrupt Digital input
5 MC33937_SCK DSPI[4]_SCK MC33937 Serial Peripheral Interface Clock Digital output
6 MC33937_SIN DSPI[4]_SIN MC33937 Serial Peripheral Interface Input Digital output
7 MC33937_SOUT DSPI[4]_SOUT MC33937 Serial Peripheral Interface Output Digital input
8 MC33937_CS DSPI[4]_CS MC33937 Serial Peripheral Interface Chip Select Digital output
Interface Pin Signal Name MCU Signal Description Direction
1 BEMFB — Phase B Back-EMF voltage
2 BEMFC — Phase C Back-EMF voltage
3 BEMFA — Phase A Back-EMF voltage
4 PFCZC — Power factor correction Zero-cross
5 PFC — Power factor correction PWM
6 BRAKE — DC-bus brake control signal
7 PFCEN — Power factor correction enable signal
8 SERIAL — Serial interface
9 TEMP — MC33937A Temperature
Interface Pin Signal Name MCU Signal Description Direction