NXP Semiconductors MC56F80000-EVKUM, User Manual, Page: 2 / 26

NXP Semiconductors
MC56F80000-EVKUM
MC56F80000-EVK Board User Manual
1 Overview
The NXP MC56F80000 Evaluation Kit board (MC56F80000-EVK) is a simple, yet
sophisticated design featuring the MC56F80748 digital signal controller (DSC), a
device that combines the processing power of a digital signal processor (DSP) and the
functionality of a microcontroller (MCU).
The MC56F80xxx device family is based on a 32-bit 56800EF core with:
• Up to 100 MIPS at 100 MHz core frequency
•
DSP and MCU functionality in a unified C-efficient architecture
• Enhanced single-precision floating-point unit (eFPU)
• Coordinate rotation digital computer (CORDIC) engine
MC56F80748 has 64 kB on-chip Flash memory and 8 kB on-chip RAM.
The MC56F80000-EVK board features OpenSDA, which provides an onboard debugger
(consider it as an on-chip Multilink debugger) and a virtual serial port for rapid prototyping
and product development. On MC56F80000-EVK, the OpenSDA MCU is a Kinetis K
Series K26 family device, MK26FN2M0VMI18.
The MC56F80000-EVK hardware is form-factor compatible with the Arduino
™
R3 pin
layout, providing a broad range of expansion board options. The onboard interface
includes a 3-axis MEMS accelerometer, PWM and user LEDs, buttons, ADC test circuits,
OPAMP test circuits, and external serial flash memory.
This document provides detailed information about the MC56F80000-EVK board
interfaces, power supplies, clocks, LEDs, and other interfaces.
1.1 Acronyms
The table below lists and explains the acronyms and abbreviations used in this
document.
Term Description
ADC Analog-to-digital converter
CLK Clock
CMP Comparator
DIO Data input/output
DNP Do not populate
DSC Digital signal controller
DSP Digital signal processor
GPIO General-purpose input/output
JTAG Joint test access group
LDO Low dropout
LPI2C Low-power inter-integrated circuit (LPI2C)
MCU Microcontroller unit
MEMS Microelectromechanical system
NTC Negative temperature coefficient
Table 1. Acronyms and abbreviations
MC56F80000-EVKUM All information provided in this document is subject to legal disclaimers. © 2022 NXP B.V. All rights reserved.
User manual Rev. 1 — 14 December 2022
2 / 26