Connectivity Test
MC1322x SMAC Demonstration Application User’s Guide, Rev. 1.3
Freescale Semiconductor
3-3
3.2
UART/USB Virtual Com Port Setup
This section describes how to set up the UART/USB virtual Com port for the Connectivity application.
Figure 3-3
shows the default SMAC RS-232 settings.
Figure 3-3. Default SMAC RS-232 Setting
1. Use a PC terminal program and set the correct baud rate, data bits, parity, COM port, and flow
control as shown in .
2. In the PC terminal program, set the properties in the optional settings as shown in
Figure 3-4
.
Figure 3-4. Additional Terminal Program Settings