NXP Semiconductors
IOTZTB-DK006
IOTZTB-DK006 Development Kit User Guide
UM11393
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2021. All rights reserved.
User Guide
Rev.3.0
— 9 March 2021
11 of 23
3. K32W061/041 Upgrade Module Boards
K32W061 upgrade module board is the K32W061 minimum system board. The module
should be mounted to carrier board as the target. There is a RF connector on this board,
which can be used to RF signal testing.
4. JN5189 Upgrade Module Board
The JN5189 upgrade Module board is identical to the K32W061 upgrade module board
but with a JN5189 device fitted.
5. K32W061AM/A Upgrade Module Boards
K32W041AM and K32W041A upgrade module boards can be mounted on the DK6
board as the target.
The difference between K32W041A and K32W041AM upgrade module boards is that
some resistors are put as N.C. on K32W041AM board and as 0 Ohm on the
K32W041A
board to enable external Flash memory. Please refer to the schematic on the next figure
for details.
Figure 6 K32W061 module board
Figure 7 K32W041AM upgrade module board
