TWRS08PT60LAB
TWR
‐
S08PT60
Lab
Guide
Page
3
of
11
1
Purpose
These labs will show the various MC9S08PT60 demo examples on the Tower System module. LAB1 to
LAB6 are integrated in a single project TWR-S08PT60_lab, while others are independent. You can switch
from LAB1 to LAB6 via the keyboard interface SW2 and/or SW3. The demo examples include TSI with low
power, potentiometer,
accelerometer, IR, UART loop demo, and SPI demo. You can also play with the
standalone Flash & EEPROM lab (TWR-S08PT60_flash_lab), as well as the BLDC demo (TWR-
S08PT60_bldc_demo).
2
Software
Requirements
Compiler, linker, and debugger:
CodeWarrior 10.1 or newer with S08PT60 service pack
(
http://www.freescale.com/webapp/sps/site/homepage.jsp?code=CW_HOME
)
Tower System Tool Kits:
P&E virtual serial toolkit V2.05
(
http://www.pemicro.com/osbdm/index.cfm
)
3
Default
Jumper
Settings
Before working with labs, make sure that the default jumpers on the TWR-S08PT60 Tower System Module
are as the following table before applying power to the module. The picture below outlines the position of
the affected jumpers and the components.