Quick Start Guide
8
Resume Your Application
at a Breakpoint
The code will run up to the breakpoint
that you set in the previous step. When
it reaches it, the code will stop in the
debugger and display the current
location from which the code is running
at your breakpoint. You then can resume
execution or examine elements of the
application in the IDE.
Run a Sample
Project
Find a desired application in the
“MC56F827xx CodeExample” directory or
develop your own project.
For project importing, exporting and
running directions, see the Getting
Started section of the TWR-56F8200
User Manual, available for download at
freescale.com/TWR-56F8200
.
Run 3-Phase BLDC
Motor with LV3PH Motor
Control Kit
To run the 3-phase low-voltage BLDC
motor using the MCLV TWR card, refer to
the “Getting Started” chapter of the TWR-
56F8200 User Manual.
Further Instruction for
TWR-MC-LV3PH Motor
To get a TWR-MC-LV3PH motor turning
quickly, refer to the “Getting Started”
chapter of the TWR-56F8200 User
Manual. Here you will find instructions
detailing how to program your TWR card
with the Motor Spin demo. The software
demonstrates how to get the motor
spinning and then control the motor speed
and direction via the FreeMaster Graphical
User Interface. For more information
on the TWR-MC-LV3PH motor, visit
freescale.com/TWR-MC-LV3PH
.
7
8
9
10
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
