System Overview
MC13192EVB Reference Manual, Rev. 1.2
2-4
Freescale Semiconductor
2.5
Background Debug Module (BDM) Interface
A Background Debug Module (BDM) interface is available on the MC13192EVB. The BDM interfaces
to the MCU which provides an interface for programming the on-chip FLASH. The BDM connector
provides the ability to connect a debug interface for development and accessing different memory data.
The BDM interface can also be used for traditional debugging. Debugging is accomplished using the
CodeWarrior IDE for HCS08.
2.6
Reset
RESET is a dedicated pin with a pull-up device built in. This pin is connected to the 6-pin BDM connector
so a development system can directly reset the MCU system. The MCU resets the EVB as part of its
start-up sequence when power is applied and the On/Off switch is set to on. If required, a manual external
reset can be executed by pressing the reset switch. In all cases, the reset sequence resets the MCU, which
in turn, resets the MC13192.
Summary of Contents for FREESCALE MC13192
