NXP Semiconductors Freescale FRDM-KL43Z, User Manual

Page: 2 / 15

FRDM-KL43Z User’s Guide, Rev. 1
2 NXP Semiconductors
Reference documents
accelerometer, magnetometer, capacitive touch slider (not directly connected because there is no TSI
module on the chip
—
only software TSS can be used with GPIO method), and ambient light sensor.
The FRDM-KL43Z features the Freescale open standard embedded serial and debug adapter known as
OpenSDA. This circuit offers several options for serial communications, flash programming, and run-control
debugging.
2 Reference documents
Table 1 provides a list of reference documents for the FRDM-KL43Z hardware. All of these documents
are available online at www.freescale.com/FRDM-KL43Z.
3 Getting started
Refer to the FRDM-KL43Z Quick Start Package for step-by-step instructions for getting started with the
FRDM-KL43Z. See the “Jump Start Your Design” section on http://www.freescale.com/FRDM-KL43Z
for the Quick Start Package and software lab guides.
4 FRDM-KL43Z hardware overview
The features of the FRDM-KL43Z include:
• MKL43Z256VLLZ4 MCU (48 MHz, 256 KB flash memory, 32 KB RAM, 16 KB ROM (with
Kibble), Low power, 64LQFP package)
• Dual role USB interface with mini-B USB connector
• OpenSDA
• Four-digit segment LCD module
• Capacitive touch slider (not directly connected; 0R should be populated)
• Ambient light sensor
• MMA8451Q accelerometer
• MAG3110 Magnetometer (Note that for board revision SPF-28062_C1 and later, the MAG3110 is
no longer available and is not present on the board)
Table 1. FRDM-KL43Z reference documents
File name Description
FRDM-KL43Z Quick Start Package Quick Start Guide and supporting files for getting started with the
FRDM-KL43Z.
FRDM-KL43Z User’s Guide This document—overview and detailed information for the FRDM-KL43Z
hardware.
FRDM-KL43Z Pinouts Spreadsheet of pin connections for all MCU pins. Includes pinout for the I/O
headers, Arduino R3 compatibility chart, and OpenSDA MCU pinout.
FRDM-KL43Z Schematics PDF schematics for the FRDM-KL43Z hardware.
FRDM-KL43Z Design Package Zip file containing all design source files for the FRDM-KL43Z hardware.
OpenSDA User’s Guide Overview and instructions for use of the OpenSDA embedded.