manualshive.com logo in svg

NXP Semiconductors FRDM-HB2000FEVM, User Manual, Page: 20 / 37

Share
Download
NXP Semiconductors FRDM-HB2000FEVM User Manual Download Page 20

NXP Semiconductors

KTFRDMHB2000FEVMUG

FRDM-HB2000FEVM evaluation board

KTFRDMHB2000FEVMUG

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2016. All rights reserved

User guide

Rev. 1.0 — 5 July 2016

20 / 36

6 Installing the software and setting up the hardware

6.1 Configuring the hardware

The FRDM-HB2000FEVM consists of an H-Bridge, a parallel and SPI interface, power

conditioning circuitry and an FRDM-KL25Z board. The board can be configured for use in

conjunction with a FRDM-KL25Z board or a function generator.

Caution

 

 

When using the FRDM-HB2000FEVM, make sure that the maximum motor supply voltage (VPWR) stays

within the 5.0 V to 40 V range. Operating outside this range may cause damage to the board.

6.1.1 Step-by-step instructions for setting up the hardware for use with a FRDM-

KL25Z

To configure the FRDM-HB2000FEVM for use with the FRDM-KL25Z do the following:
1. Connect the FRDM-HB2000FEVM to the FRDM-KL25Z using the Arduino

™

connectors on each board.

2. Connect the USB cable (not supplied with the kit) between the PC and the KL25Z

USB port on the FRDM-KL25Z board.

3. With the power switched off, attach the DC power supply to the VBAT and GND screw

connector terminal (J20) on the evaluation board.

4. Connect the load to the screw terminal (J21).

Figure 13

 illustrates the hardware configuration using a FRDM-KL25Z.

FRDM-KL25Z Board

FRDM-HB2000FEVM

Brushed DC Motor

5 - 40 V Power Supply, 20 A

Workstation

Standard A to Mini-B

USB Cable

USB

Figure 13. FRDM-HB2000FEVM configured for use with an FRDM-KL25Z board

Summary of Contents for FRDM-HB2000FEVM






































Reviews:

No comments