NXP Semiconductors FRDM-HB2000FEVM, User Manual, Page: 18 / 37

NXP Semiconductors
KTFRDMHB2000FEVMUG
FRDM-HB2000FEVM evaluation board
KTFRDMHB2000FEVMUG All information provided in this document is subject to legal disclaimers. © NXP B.V. 2016. All rights reserved
User guide Rev. 1.0 — 5 July 2016
18 / 36
FRDM-HB2000FEVM FRDM-KL25Z Pin hardware name
Header Pin Header Pin FRDM-HB2000FEVM FRDM-KL25Z
Description
J10 2 J2 2 N/C PTA13 No Connection
J10 3 J2 3 DATA1/IN2 PTC13 IN2 signal for the H-
Bridge
J10 4 J2 4 N/C PTD5 No Connection
J10 5 J2 5 FS_B PTC16 Fault status pin to
report fault
J10 6 J2 6 CS_B PTD0 Chip select bar pin
J10 7 J2 7 N/C PTC17 No Connection
J10 8 J2 8 MOSI PTD2 Master output serial
input
J10 9 J2 9 N/C PTA16 No Connection
J10 10 J2 10 MISO PTD3 Master input serial
output
J10 11 J2 11 N/C PTA17 No Connection
J10 12 J2 12 SCLK PTD1 Clock for SPI
J10 13 J2 13 N/C PTE31 No Connection
J10 14 J2 14 GND GND No Connection
J10 15 J2 15 N/C N/C No Connection
J10 16 J2 16 N/C VREFH No Connection
J10 17 J2 17 CFB_READ PTD6 ADC input for
monitoring the CFB
pin
J10 18 J2 18 N/C PTE0 Disable signal to tri-
state the output and
put the part in Sleep
mode (Active Low)
J10 19 J2 19 N/C PTD7 No Connection
J10 20 J2 20 FRDM_VDD PTE1 No Connection
J23 1 J10 1 N/C PTE20 No Connection
J23 2 J10 2 N/C PTB0 No Connection
J23 3 J10 3 N/C PTE21 No Connection
J23 4 J10 4 N/C PTB1 No Connection
J23 5 J10 5 N/C PTE22 No Connection
J23 6 J10 6 N/C PTB2 No Connection
J23 7 J10 7 N/C PTE23 No Connection
J23 8 J10 8 N/C PTB3 No Connection
J23 9 J10 9 N/C PTE29 No Connection
J23 10 J10 10 N/C PTC2 No Connection
J23 11 J10 11 N/C PTE30 No Connection
J23 12 J10 12 N/C PTC1 No Connection
J25 1 J9 1 N/C PTB8 No Connection
J25 2 J9 2 N/C SDA_PTD5 No Connection
J25 3 J9 3 N/C PTB9 No Connection
J25 4 J9 4 N/C P3V3 No Connection
J25 5 J9 5 N/C PTB10 No Connection
J25 6 J9 6 N/C RESET/PTA20 No Connection
J25 7 J9 7 N/C PTB11 No Connection
J25 8 J9 8 N/C P3V3 No Connection