User’s Manual
EVB912UF32 Evaluation Board Rev 1
MOTOROLA
Configuration and Operation
7
User’s Manual — EVB912UF32
Section 2 Configuration and Operation
2.1 Introduction
This section consists of configuration information, connection descriptions, and
other operational information that may be useful in your development activities.
2.2 Board Configuration Components
2.2.1 Switches
Table 2-1 is a summary of the switches of the EVB912UF32.
2.2.2 Mode Jumpers (W13, W16, and W18)
Jumpers W13, W16, and W18 allow the user to configure the boot mode. The
selection takes effect only on power up or after a reset is applied.
Table 2-1 Switches
Component
Position
Effect
System Power
Switch, S1
Move this switch to the ON position to enable the power
source connected to J20 to power the system.
Factory setting is OFF.
System Reset Switch,
S2
Push to reset the MC9S12UF32.
ON
OFF
S1
S2