Figure 4. i.MX MIPI panel
Figure 5. i.MX MIPI camera
NOTE
• To test the MIPI-DSI to HDMI display, use the i.MX mini SAS cable to connect
the DSI-to-HDMI adapter to the "HDMI DSI" port.
• To test the MIPI panel display, conect the i.MX MIPI panel to the "HDMI DSI"
port.
• To test the camera, connect the i.MX CSI MIPI Camera to the "Camera" port.
• The QCOM 1PJ Wi-Fi/Bluetooth module is used on the i.MX 8M Mini EVK
LPDDR4 Board.
• The BCM 1MW Wi-Fi/Bluetooth module is used on the i.MX 8M Mini EVK
DDR4 Board.
Working with the i.MX 8M Mini EVK Board
Android™ Quick Start Guide, Rev. P9.0.0_2.0.0-ga, 04/2019
4
NXP Semiconductors
