13
(7)
If all the operation is normal, the POWER, SOURCE LED will glow solid blue and Signal Quality
will light in blue with 3 signal quality. Please refer the next LED details part:
Note:
A.
Make sure your multiple High-Definition devices connected with NX-HDMIWL-T have already
powered on.
B.
Warming-up or source switching time should be approximately 15~20 seconds during the
normal operation.
C.
NX-HDMIWL remote control will not control your A/V components’ operation.
D.
Video from the YPbPr component source device appears but dim, press the
3/4 YPbPr
button
repeatedly on the remote control to fine-tune the picture performance.
TRANSMITTER/RECEIVER LED indicator light details:
LED indicator status light on the front that indicates what’s happening..
Note:
A.
The Quality LED indicator shows whether a connection is active with the transmitter side.
During the normal operation, the Quality LED indicator will light in blue with 3 signal quality. If
there is no signal quality and blinking blue in Source & Status LED, the transmitter are most
likely out of range. You may verify the range and adjust the distance closer between transmitter
and your HDTV set with receiver. (The maximum video transmission range is 20 meters at line
of sight (LOS) scenarios.)
B.
It’s normal to see the Source LED blinking when you switch your AV sources.
C.
If disconnection or lost link occurs, it maybe due to the following reason:
POWER
LED
Source LED
Mode
Status
Solid Red
Off
Standby
In standby mode
Solid Red
Off
HDMI
connection
in Hot Plug
status.
TV & Receiver are both powered on, and then
remove HDMI cable connection from receiver.
After 1 minute, the receiver will automatically enter
the standby mode which POWER LED stops
blinking and turns solid red.
Blinking Blue
Blinking
In wireless
Linking
Warning up in progress or interrupted RF
connection.
Blinking 3 times
per second
(Quickly)
Input from selected source device is not detected.
Blinking 1 times
per second
(Slowly)
Unrecognized video format.
(Not support or out of range.)
Solid Blue
Solid blue
On Mode
Recognized video format. Transmission is available
with stable RF signal.
