10
Step 4: Power on your NX-HDMIWL-T and NX-HDMIWL-R
(1)
Place the two AAA batteries into the remote control.
(2)
If users already plugged the power cord, the power or NX-HDMIWL will be turned on
automatically. If it’s under Standby mode (The POWER LED shows red), press the
TRANSMITTER and RECEIVER POWER button to turn on the NX-HDMIWL-T and
NX-HDMIWL-R.
(3)
During warm-up, the POWER LED will blink blue until the signal link between NX-HDMIWL-T
and NX-HDMIWL-R is established.
