15
6.
7.
1.
2.
3.
4.
5.
•
•
Slide the switch with the rails (A) and ears (C) installed on it into the left and right rails (B)
on the rack. Use four M6 screws (E) to fix the rack mount ears (C) to the rack. Do not tighten
the screws yet.
Sliding the Blades in the Rails
When fully inserted, fix the switch by tightening the 8 screws (E) inserted in Step 5 and Step
6 with a torque of 4.5±0.5.
Removing the System from the Rack
To remove a unit from the rack:
Turn off the system and disconnect it from peripherals and from the electrical outlet.
While your installation partner is supporting the system’s weight:
Loosen the screws attaching the rack mount ears (C) to the rack. Do not remove them yet.
Loosen the screws attaching the rack mount blades (B) to the rack, and pull the blades
towards you, while your partner is holding the system.
Extract the loosened screws from Step 2 and dismount the system from the rack.
Remove the rails and brackets from the chassis by unscrewing 4 screws.
Telescopic Rail Kit
There are two installation kit options:
Standard depth systems should be mounted using the standard rail kit.
Short depth systems can be mounted using either of the rail kits.
Kit OPN
Legacy Kit OPN
Rack Size and Rack Depth Range
930-9BRKT-00JJ-000
MTEF-KIT-F
600-800 mm
The telescopic rail kit is not included in the system’s package, and can be purchased
separately.
