Nvidia nForce2 Ultra 400 User Manual Download Page 52

Page: 52 / 78

BIOS

Page 4-20

CPU Voltage Regulator

This item allows you to set the CPU Vcore voltage.
Options: 1.400V to 2.200V in 0.025V increments.

AGP Voltage Regulator

This item allows you to set the AGP slot voltage.
Options: 1.5V to +1.8V in 1V increments.

DIMM Voltage Regulator

This item allows you to set the DIMM slot voltage.
Options: 2.50V, 2.63V, 2.77V, 2.90V.

Chipset Voltage Regulator

This item allows you to set the chipset slot voltage.
Options: 1.6V, 1.8V, 2.0V.

Warning:

Default chipset voltage is 1.6V. Setting higher voltage may cause damage to
chipset. Please ensure proper cooling for Northbridge and Southbridge.

4-9 Defaults Menu

Selecting “Defaults” from the main menu shows you two options which are de-
scribed below

Load Fail-Safe Defaults

When you press <Enter> on this item you get a confirmation dialog box:

Load Fail-Safe Defaults (Y/N) ? N

Pressing ‘Y’ loads the BIOS default values for the most stable, minimal-performance
system operations.

Load Optimized Defaults

When you press <Enter> on this item you get a confirmation dialog box:

Load Optimized Defaults (Y/N) ? N

Pressing ‘Y’ loads the default values that are factory settings for optimal perfor-
mance system operations.

Summary of Contents for nForce2 Ultra 400















































































Search results

Summary of Contents for nForce2 Ultra 400

Reviews:

Related manuals for nForce2 Ultra 400

Brands by name

Popular brands

Nvidia nForce2 Ultra 400, User Manual

Search results

Summary of Contents for nForce2 Ultra 400

Reviews:

Related manuals for nForce2 Ultra 400

Brands by name

Popular brands