Nvidia ForceWare Software User'S Manual Download Page 17

Page: 17 / 159

NVIDIA Corporation

H A P T E R

ETTING

OUR

RAID C

ONFIGURATION

This chapter provides instructions for:

•

Setting Up a Non-Bootable RAID Array

•

Setting Up a Bootable RAID Array

Setting Up a Non-Bootable RAID Array

RAID arrays can be created/deleted using both MediaShield RAID BIOS and the
MediaShield RAID Manager from Windows. This section only covers basic BIOS setup
required for non-bootable array.

• See the section

Setting Up a Bootable RAID Array

” for instructions on configuring the

RAID array in BIOS.

• See

“Creating RAID Arrays” on page 43

for instructions on how to create a RAID array

for your unused SATA storage devices.

• See

“Using the NVIDIA MediaShield RAID Management Utility” on page 33

for details

on configuring non-bootable RAID from Windows.

Setting Up the BIOS

Start your computer, then press

Delete

to enter the BIOS setup.

Summary of Contents for ForceWare
































































































































































Search results

Summary of Contents for ForceWare

Reviews:

Related manuals for ForceWare

Brands by name

Popular brands

Nvidia ForceWare, Software User'S Manual

Search results

Summary of Contents for ForceWare

Reviews:

Related manuals for ForceWare

Brands by name

Popular brands