Nvidia ForceWare Software User'S Manual Download Page 37

Page: 37 / 159

NVIDIA Corporation

H A P T E R

SING

THE

NVIDIA M

EDIA

HIELD

RAID

ANAGEMENT

TILITY

About the MediaShield RAID Management Utility

The MediaShield RAID software ships with an application called MediaShield. This
chapter describes the MediaShield tasks in the following sections:

•

Viewing RAID Array Configurations

View an array configuration (mirrored, striped, mirrored-striped, JBOD, RAID 5 or any
supported combination)

•

Setting Up a Spare RAID Disk

•

View free and/or dedicated free disks

•

Designate a free disk to a particular array

• Creating RAID Arrays

• Deleting a RAID Array

• Migrating From One RAID Array to Another

• Hot Plug Array

Summary of Contents for ForceWare
































































































































































Search results

Summary of Contents for ForceWare

Reviews:

Related manuals for ForceWare

Brands by name

Popular brands

Nvidia ForceWare, Software User'S Manual

Search results

Summary of Contents for ForceWare

Reviews:

Related manuals for ForceWare

Brands by name

Popular brands