N V I D I A C o r p o r a t i o n
124
N V I D I A D i s p l a y P r o p e r t i e s
U s e r ’ s G u i d e
Override refresh rates
When you click this option, the list box of values becomes enabled so you can
select individual refresh rates for each resolution and combination of bit depths,
as shown in
Figure 9.16
Direct3D Refresh Rate Overrides
To override a refresh rate, follow these steps:
1
From the Refresh Rate column, click the word
Default
on the line that
contains the Resolution for which you want to change the refresh rate. A list
box of values appears, as shown in
2
From the list, select the refresh rate you want for the associated value in the
Resolution column.
3
If you want to eliminate any of the three bit depths in the row, simply click to
disable (remove the check mark from) that bit depth.
4
Click
Apply
.
nViewGuide_.book Page 124 Monday, August 11, 2003 4:03 PM
