nVent RAYCHEM Elexant 9200i, Manual

Page: 5 / 16

nVent.com/RAYCHEM
|
5
RAYCHEM-AR-H60819-Elexant9200i-EN-2009
1.1.3 Antenna Package Variants
All Antenna Packages listed are accessories to the Enclosures shown above, and are shown to assist
the customer in product selection. However, they are not included in the approvals of the Enclosures.
Each component of the antenna packages must have its own suitable certification for each use case.
Refer to the section on 'SPECIFIC CONDITIONS OF SAFE USE' for further information.
(See Notes
1 and 2 )
Catalog
Number Part Number Description
10392 - 151 9200 i-E-PC-ANT- 868 -OM 1 - 3
Elexant 9200 i 868 MHz Antenna Package Accessory -
OMNI 2 dBi antenna with 3 meter coaxial cable, antenna
bracket, and gland
10392 - 152 9200 i-A-PC-ANT- 900 -OM 2 - 3
Elexant 9200 i 868 - 900 MHz Antenna Package Accessory
- OMNI 2 dBi antenna with 3 meter coaxial cable, antenna
bracket, and gland
10392 - 153 9200 i-C-PC-ANT- 024 -OM 3 - 3
Elexant 9200 i 2 . 4 GHz Antenna Package Accessory - OMNI
2 dBi antenna with 3 meter coaxial cable, antenna bracket,
and gland
10392 - 154 9200 i-C-PC-ANT- 900 -YA 1 - 3
Elexant 9200 i 868 - 900 MHz Antenna Package Accessory
- OMNI 5 dBi YAGI antenna with 3 meter coaxial cable,
antenna bracket, and gland
9200 i-ANT-C 9200 i-ANT-C Customized Antenna Package Accessory
Table 2 - Elexant 9200 i Antenna Packages
Notes:
1. Many countries restrict the use of specific Radio Frequencies. In general, the following frequencies can be
used accordingly:
a. 868 MHz – EMEAI
b. 900 MHz – North America
c. 2 . 4 GHz – Global
2. Further information pertaining to specific regional information can be found within the manufacturer's
documentation.
1.1.4 Product Features
•
Available in three frequencies for global coverage:
Ȧ 868 MHz, 900 MHz, 2 . 4 GHz
• Multiple network topologies & modes
Ȧ Point to Point / Star, Line / Mesh
Ȧ I/O Data, Serial, PLC / Modbus RTU
• Multiple Radio setup types
Ȧ Master, Slave, Repeater / Slave
Ȧ 128 bit Advanced Encryption Standard (AES)
• Self-Healing
Ȧ Radios auto-negotiate alternate pathways in the event of a lost path
• Long distance coverage
The Elexant 9200 i is an encapsulation of a 3 rd party transceiver and associated equipment. It provides
a transparent communications bridge between a Master and Slave / Repeater transceiver, allowing for
communications to span many kilometers. The main interface to a Heat Tracing Controller is a RS-
485 Serial
interface, supporting the Modbus RTU protocol.A full set of features can be found within the manufacturer’s
documentation.