NuMaker-M463KG
Jul. 20, 2022
Page
23
of 56
Rev 1.00
N
UMA
K
E
R
-M
46
3
KG
US
E
R MA
NUA
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
To use JP1 as external power supply source, please follow the steps below:
1. Remove the resistor on ICEJPR1 (MCUVCC).
2. Solder the resistor on ICEJPR2 (ICEVCC) depending on the ICE chip operating voltage.
3. Connect ICEJ3 to PC.
4. Connect the external power supply to JP1.
To use Vin or J3 as external power supply source with Nu-Link2-Me detached from NuMaker-
M463KG, please follow the steps below:
1. Detach the Nu-Link2-Me from NuMaker-M463KG.
2. Connect the external power supply to Vin or J3.
To use JP1 as external power supply source with Nu-Link2-Me detached from NuMaker-
M463KG, please follow the steps below:
1. Detach the Nu-Link2-Me from NuMaker-M463KG.
2. Connect the external power supply to JP1.
HS-USB Connector
External V
DD
Connector
External V
SS
Connector
NU1 pin8 (VIN)
Detach Nu-Link2-Me
"
"
Figure 3-7 Detach the Nu-Link2-Me from NuMaker-M463KG
