Nuvoton NuMaker-HMI-N9H26, User Manual

Page: 10 / 32

NuMaker-HMI-N9H26
Mar. 15, 2022 Page 10 of 32 Rev 1.00
NUMA
K
E
R
-HMI
-N
9H26
US
E
R M
A
NU
A
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
2.1 NuMaker-N9H26 & NuDesign-LCD5 Jumper Description
The NuMaker-HMI-N9H26 is the specific development tool for N9H26 chip series. Users can use
NuMaker-HMI-N9H26 to develop and verify the application program easily.
2.1.1 Power Setting

CON3: VDD5V Voltage connecter in NuMaker-N9H26

CON5
’s Pins 1 & 2: DVDD33 Voltage connector in NuMaker-N9H26

CON5
’s Pins 39, 40, 47 & 48: Power ground in NuMaker-N9H26

CON5
’s Pins 35 & 36: DVDD18 Voltage connector in NuMaker-N9H26

CON1
’s Pins 1 & 2: VD33 Voltage connector in NuDesign-TFT-LCD5

CON1
’s Pins 39, 40, 47 & 48: Power ground in NuDesign-TFT-LCD5

Boot Select:
JP1 Boot From Descriptions
0 Recovery Mode Boot from USB
1 Norma; Mode
Boot from sequence:
SD

SPI

USB
Table 2-1 Boot from Select (JP1)
2.1.2 Debug Connector

JP1: Shorted for Recovery Mode

CON5: Connector in target board (NuMaker-N9H26) for connecting with LCM Module
board (NuDesign-TFT-LCD5)

CON7: Connector in JTAG ICE adaptor for connecting with a target board (NuMaker-
N9H26)
Pin No Pin Name Pin No Pin Name
1 DVDD33 2 DVDD33
3 TRST 4 GND
5 TDI 6 GND
7 TMS 8 GND
9 TCK 10 GND
11 GND 12 GND
13 TDO 14 GND
15 RESETn 16 GND
17 NC 18 GND