NUC900 Diagnostic Code User’s Manual
The above information is the exclusive intellectual property of Winbond Electronics and shall not be disclosed, distributed or reproduced without permission from Winbond.
1110-0001-08-A 6/18/2009
Jumper Settings
None
Test Sequence
1.
Plug the LCD module TD035STED3 on the EV board.
2.
Test function will show the image on the LCD.
3.
The image demonstrates whether correctly.
Note
Program will capture the image and rotate the image on the LCD.
2.4.10 Scaling Up
Instrument
LCD module TD035STED3
Jumper Settings
None
Test Sequence
1.
Plug the LCD module TD035STED3 on the EV board.
2.
Test function will show the image on the LCD.
3.
The image demonstrates whether correctly.
Note
Program will scale up the image on the LCD gradually.
2.4.11 Scaling Down
Instrument
None
Jumper Settings
None
Test Sequence
1.
Plug the LCD module TD035STED3 on the EV board.
2.
Test function will show the image on the LCD.
3.
The image demonstrates whether correctly.
Note
Program will scale down the image on the LCD gradually.
2.5 Audio
NUC910 audio controller has two audio interfaces - I2S and AC-link. AC’97 is used on the NUC910
EV board. The AC’97 playback test is executed.
