4
Once the appliance is plugged in, the LED indicator light will turn red indicating the appliance is
in ‘standby’ mode.
Press the power button to turn on the appliance, the LED indicator light will turn to green.
Press the power button again to turn the appliance off.
3.
Ion function
The ion generator inside the appliance provides millions of negative ions and turns on
automatically when the appliance is on. The ion generator turns off when the appliance is turned
off.
Care and maintenance
Always make sure the appliance is turned off and unplugged before cleaning.
1.
Turn the bottom cover clockwise to remove.
2.
To change the filter, please remove the old HEPA filter from the appliance and insert the new
filter.
3.
Place the bottom cover back onto the appliance and turn anticlockwise till you hear it click in
place. This indicates that the bottom cap is secured to the appliance.
4.
The appliance can now be operated normally after being plugged in.
HEPA Filter replacement
Replace the HEPA filter every 6 - 9 months of usage.
To buy new HEPA Filter, please visit
Cleaning the surface of the housing
1.
Turn off the appliance and unplug the USB cable.
2.
Use a soft cloth to clean the surface of the housing.
Troubleshooting
Problem
Possible Cause
Solution
The appliance does
not work.
The USB cable is not properly
connected to the appliance.
The USB cable is damaged
Connect the USB cable properly to
the appliance.
Replace the USB cable.
Switching on the
appliance, there is
no airflow at all.
The outlet airflow is being blocked by
something.
Damage may have incurred within the
Clean the outlet of anything blocking
it and wipe the outside surface with a
soft dry cloth.
Contact the customer service to
