Nuvo Music Port NV-MP, Installation Manual

Page: 7 / 46

5
Figure 2: –Music Port Hardware Connections
III. Establishing Music Port in the I8G and E6G Configurator Software (Fig. 3)
The I8G and E6G Configurator Software is an optional setup tool for establishing
sources and zone control of the Grand Concerto and Essentia E6G Audio Distribution
Systems. The Source tab within the software allows each of the six available source
inputs to be established.
To establish desired inputs within the I8G and E6G Configurator, within the “Source”
tab of the Configurator, double click on an available source input 1-6. This will open a
“Source Select” window. There, you can establish a name for the Music Port sources
within the “Display Name” window (Note that unless you check the box “Always Use
Display Name (ignore name sent by NuVoNet Device)”, the Music Port will
automatically place a name in the Source menu. Create a three-character abbreviation
for each of the Music Port sources in the “Short Name” window. Scroll to NuVo as a
manufacturer and select NV-MP and double click. Repeat these steps for each of the
Music Port sources being established.
R
SYS ON
EXT. MUTE
3033118
C US
CONFORMS TO
UL STD.6500
CERTIFIED TO
CAN/CSA STD.E60065
NuVo Technologies Cincinnati Ohio USA
FUSE:T5 A 120V 60Hz 500W
MODEL NV-I8DM
SIX SOURCE EIGHT ZONE
AUDIO DISTRIBUTION SYSTEM
www.nuvotechnologies.com
VARIABLE
OUTPUT
FIXED
OUTPUT
TIP=L
RING=R
RS-232
CONNECT TO
NV-I8X
USE NV-SLC1
CABLE
CONNECT TO
NV-I8EZP1
USE NV-NC1
CABLE
USE CNLY WITH 250V FUSE ZONE 7&8
SYSTEM NETWORK DIGITAL LINK
PROGRAM
1 2 3 4 5 6
NuVoNet
POWER
Address
NuVoNet Source Address
MENU
OK
Jozef Kossovit
SIR
SR 86 (P101)
Sirius Pops
3:09 PM
Hungaria