10
Connections & Wiring
EZ-Coax™ BNC Connection
RS-485 Connection
Use minimum of AC 24V / 40VA power source.
• Connect the VIDEO-OUT jack to the VIDEO-INPUT of the device.
• As the connecting method varies with the equipment, refer to the manual supplied with
the equipment.
• Always make sure that the camera’s power is off when connecting the cables.
• The camera is supplied with second video output on the camera housing. To use this
feature along with a service monitor, second monitor cable is required.
Using a RS-485 communication, it will be able to control the ZOOM/FOCUS and OSD
menu from the controller or through the DVR. RS-485 does not allow star connection
layout. It must be in a daisy-chain configuration. An amplifier/repeater is required to
extend over 1.2km in distance.
KEYBOARD CONTROLLER
(FIGURE1: SW2 #1 is ON)
(FIGURE1: SW2 #1 is OFF)
Connecting the ZoomMatic™ Integrated Camera to the EZ-Coax™
