25
Network Camera User Manual
※
Application Scenario Illustration
1. Auto-focusing function should not been enabled for exception detection.
2. Try not to enable object removal detection when light changes greatly in the scene.
3. Please contact us for more detailed application scenarios.
4.5.3
Line Crossing
Line Crossing
: The relevant alarms will be triggered if someone or something crosses the
pre-defined alarm lines.
Go to Config
Event
Line Crossing interface as shown below.
1. Enable line crossing alarm and set the alarm holding time.
2. Set alarm trigger options. The setting steps are the same with that of motion detection.
Please refer to motion detection chapter for details.
3. Click “Save” button to save the settings.
4. Set area and sensitivity of the line crossing alarm. Click “Area and Sensitivity” tab to go to
the interface as shown below.
