15
Network Camera User Manual
4.2.3
OSD Configuration
Go to Image
OSD interface as shown below.
You may set time stamp, device name and OSD content here. After enabling the
corresponding display and entering the content, drag them to change their position. Then click
“Save” button to save the settings.
4.2.4
Video Mask
Go to Image
Video Mask interface as shown below. You can set 4 mask areas at most.
To set up video mask:
1. Enable video mask.
2. Click “Draw Area” button and then drag the mouse to draw the video mask area.
3. Click “Save” button to save the settings.
4. Return to the live to see the following picture.
