4
Encoder User Manual
The system will pop up the above-mentioned textbox to ask you to change the default password.
It is strongly recommended to change the default password for account security. If “Do not
show again” is checked, the textbox will not appear next time.
2.1.2
Directly Access through Web Browser
The default network settings are as shown below:
IP address:
192.168.226.201
Subnet Mask:
255.255.255.0
Gateway:
192.168.226.1
HTTP:
80
Data port:
9008
You may use the above default settings when you log in the device for the first time. You may
directly connect the device to the computer through network cable.
①
Manually set the IP address of the PC and the network segment should be as the same as the
default settings of the device. Open the network and share center. Click “Local Area Connection”
to pop up the following window.
Select “Properties” and then select internet protocol according to the actual situation (for
example: IPv4). Next, click “Properties” button to set the network of the PC.
