Nuvico EasyTrak SC-P35N Installation Manual Download Page 10

Page: 10 / 64

１０

INTRODUCTION

Features

The Speed

Dome Camera features a high resolution

EX-View HAD

CCD imager for

enhanced lowlight sensitivity. User friendly, on-screen pull-down menus and short-cuts make
it easy to setup and program functions.

System information aides trouble shooting by displaying the hardware and software version
of the camera’s firmware version, baud rate, and protocol.



Built-in Optical Power Zoom Camera.



248

Presets

programmed with view direction, zoom, and BLC.



Patterns

record and play back user preference of surveillance path up to 480 sec.



Scans

: 8 speed steps from slow to medium panning with smooth

Diagonal Scan



Tours

: Each tour consists up to 63 (

Preset, Pattern

, and

Scan)

Smooth

Diagonal Scan

mode and programmable Individual dwell time camera

functions.



8 Alarm inputs with 1~8 priority / 2 Auxiliary outputs programmable NC & NO.



Privacy Zones

: Video off or up to 8 masked blocks.



24 Area Titles.



64 steps of variable speed from 0.1

/sec to 420

/sec.

Max manual speed 420

/sec with

Turbo

key pressed,

Preset

speed is 420

/sec.



Programmable user preferences of speed (Slow, Medium, Fast, and AUTO).



Addressable up to 999 camera IDs (Extendable up to 3999 in special mode).



Built-in RS-485 receiver driver.



On-site software upgrade and upload/download of programmed data into the KBD/

Dome.



Built-in power-line surge protection and lightning protection.



Optional Tinted Bubble, Indoor & Outdoor pendant housing with heater & blower,

Indoor Flush Mount, Parapet mount.



Adaptive tilt limit control according to the zoom ratio provides more useful picture.



Sensitive panning control provides faster panning movement even though maximum

zoom ratio.



Temperature sensing heater control.



Automatic position compensation using the built in magnetic encoder.



Built in preventing system for preventing undesired pan/tilt movement from the

external shock.



Reliable motion tracking function to follow intruder.



Block mode alarm preset provides a useful scanning method.



On screen popup menu provides an easy way to control the dome system using

simple keyboard.



Graphical on screen display.

Summary of Contents for EasyTrak SC-P35N

































































Search results

Summary of Contents for EasyTrak SC-P35N

Reviews:

Related manuals for EasyTrak SC-P35N

Brands by name

Popular brands

Nuvico EasyTrak SC-P35N, Installation Manual

Search results

Summary of Contents for EasyTrak SC-P35N

Reviews:

Related manuals for EasyTrak SC-P35N

Brands by name

Popular brands