22
• Fixed Camera
Fixed Camera •
23
OSD Menu Instructions
OSD Menu Instructions
WB(White Balance) Control
Compensate different colors of light being emitted from different light sources.
WDR(Wide Dynamic Range)
By accumulate the scope of contrast between the brightest and darkest value of the picture,
the camera displays the adapted image automatically. The desired level “LOW”, “NORMAL”,
“HIGH” or “MANUAL”can be selected by LEFT/RIGHT key.
AGC(Auto Gain Control)
Adjust gain automatically according to the incoming signal.
• AUTO
(Auto Tracking White Balance)
It continuously monitoring color
temperature, the camera automatically
adjust the white balance within
configured limit values.
• LOW
• NORMAL
• HIGH
• MANUAL
As the level of gain increases, the screen
gets brighter and the noise level increases
as well.
• ON:
It uses initially optimized sensitivity
and noise level.
• OFF:
AGC is not operating.
• MANUAL:
Set AGC manually by
LEFT/RIGHT key as below.
• ATWDes(ATW Desaturation)
The camera automatically adjust the white balance 2,000K°~ 11,000K° by constantly
detecting the change of color temperature.
• AWC(Auto White Balance)
This setting may be used when the lighting con-
dition remain constant. Select “SAVE All Chngs.”
then press SETUP key to save the current white
balance of color temperature.
• MANUAL(Manual White Balance)
Select ATW or AWC first before selecting Manual
mode. Once Manual mode is selected, select
SETUP. Set the appropriate color temperature, and
increase or decrease the red and blue color values
while monitoring the color changes on the object.
The Manual mode enables finer adjustment.
