NUVE EN 300, User Manual

Page: 10 / 20

9
4.2 DISPLAY AND CONTROL PANEL
01-Temperature Display

This display shows the chamber temperature during the operation and the set temperature
value during programming. The error codes are also shown on this display.
02-Time Display

This display shows the elapsed time during the operation and the set value during
programming.
03-Alarm Mute Key

This key is pushed to interrupt the alarm which goes off when the program ends and if any
failure occurs during the operation.
04-Start / Stop Key

This is the key which is pushed to start the program or to stop the running program.
05-Temperature Set Key

This key is pushed to set the temperature.
06-Temperature Value Increase/Decrease Keys

These keys are pushed to increase or decrease the values on the temperature display.
07-Time Set Key

This key is pushed to set the time. (01 minute - 100 hours and Hold position)
08-Time Value Increase/Decrease Keys

These keys are pushed to increase or decrease the values on the time display.
09-Heat LED

This LED flashes during the heating process.
10-Alarm LED

It lights up when the program ends and if any failure occurs during the operation.