NUUO SCB-IP-P04, User Manual

Page: 63 / 177

The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
- 62 -
4.1.2 Camera Event – Basic Setting
[Signal Lost, General Motion, Foreign Object, Missing Object,
Focus Lost, and Camera Occlusion]
Enable Event: Check the box to activate the event.
Retrigger after status change:
check the box to retrigger after
status change [Focus lost, Camera Occlusion, Connection lost
and Digital Input/Output]
Life Cycle:

Automatic cancel event when event disappears: The alarm/action will be cancelled once the event is
fixed or ended.

Manually cancel event or event last triggered: The alarm/action will remain until being cancelled from
Mainconsole. Choose this option to avoiding missing any alarms.
Note : To cancel the event:
Method 1: Start > Open Event Report > Cancel All Events
Method 2 : Click the red crystal ball to obtain the Smart Guard Event Report. Click to cancel the
event(s).

Cancel event after ___ seconds: Enable checkbox and set a timer for canceling the event after a
specific time.
Activated Period:

Always activated: Allow alarm to be activated at all times.

As Day Mode Schedule: Customize a specific time range for the alarm to be activated.
The alarm will be available daily according to your settings.
Click on
Day Schedule to General Setting the schedule.
Choose Add Time Period and drag on the coverage bar to define an activated schedule.
Choose Remove Time Period and drag on the coverage bar to subtract from existing schedules.
Click on Clear All to remove all settings.

As Week Mode Schedule: Customize a weekly based time range for the alarm to be activated.
Click on Week Schedule to General Setting the schedule.
Choose Add Time Period and drag on the coverage bar to define an activated schedule.
Choose Remove Time Period and drag on the coverage bar to subtract from existing schedules.