FLEXESERVE
® | Flexeserve Zone® - Replacing a fan plate | V1 MAR 2021
© 2021 The Alan Nuttall Partnership Ltd
NOTE
Ensure that the unit is switched off and disconnected from the power supply when
carrying out this task.
How to guide
Flexeserve Zone
®
- Replacing a fan plate
• Remove the
earth link
from the next
fan in series
using a 10mm
wrench.
• Undo the four
fixings on the
rear of the fan
plate using a
3mm hex key.
• Pull the fan
plate slowly out
of the rear back
panel.
• Fit the
replacement
fan plate into
the rear back
panel.
• Refit the four
M5 fixings into
the fan plate
using a 3mm
hex key.
• Re-attach the
earth cable to the
next fan in series
using a 10mm
spanner.
8
9
10
11
12
7
